Rotorsandpads.com Live Chat.

Model Search

Model Serch

Home :: Select Vehicle :: Mitsubishi :: Lancer Evo IX :: 2007 :: Front Brake Rotors

2007 Mitsubishi Lancer Evolution IX front brake rotors

[319.044.87]Performance Friction 2 Piece Floating High Performance Brake Rotors 319.044.87
Our Price: $329.00
Quantity
SKU: 319.044.87
2000-09 Mitsubishi Evo - LEFT side hat and floating rotor assembly

All Performance Friction Discs adhere to the following specifications:

  • High Carbon Alloy with copper and molybdenum for high temperature strength and durability.
  • Vanes turned OD and ID for balance to reduce thermal warping and vibration.
  • Thickness variation less than .0003 inches and Run out less than .001 inches reduces Pulsation and Vibration.
  • 47 or more vanes for superior thermal capacity.
  • Aircraft quality heat treatment for micro structure alignment and durability.
  • Surface finish less than .7 microns.
  • 100% measured and inspected to meet strict tolerance specifications

    One-Piece (smooth surface) The highest quality direct replacement discs on the market, our one-piece discs are exceptionally popular with fleet and police vehicles for unrivaled durabilty, thermal stability, and Lowest Cost Per Mile.

    Two-Piece Direct Drive™ (smooth or dimpled surface) With Performance Friction’s two-piece floating Direct Drive™ Disc, the disc flange floats in the bobbin structure allowing radial and axial expansion of the disc without being constrained by the hub or hat. Eliminates Vibration and Pulsation, Reuseable hat/hub assembly, Reduces drag for increased fuel mileage and reduced pad wear. Lowest Cost Per Mile

    • Manufacuter:Performance Friction
    • Rotor Diameter in MM:319
    • Rotor Lugs:5
    • Rotor Style:Dimpled
    • Brake Rotor Type:2 Piece Floating/Direct Drive
    • Sold As:Each
    • Fitment Side:Left/Driver Side
    • Shipping Cost:Details
    [319.044.88]Performance Friction 2 Piece Floating High Performance Brake rotors 319.044.88
    Our Price: $329.00
    Quantity
    SKU: 319.044.88
    2003-05 Mitsubishi Evo VIII - RIGHT side hat and floating rotor assembly

    All Performance Friction Discs adhere to the following specifications:

  • High Carbon Alloy with copper and molybdenum for high temperature strength and durability.
  • Vanes turned OD and ID for balance to reduce thermal warping and vibration.
  • Thickness variation less than .0003 inches and Run out less than .001 inches reduces Pulsation and Vibration.
  • 47 or more vanes for superior thermal capacity.
  • Aircraft quality heat treatment for micro structure alignment and durability.
  • Surface finish less than .7 microns.
  • 100% measured and inspected to meet strict tolerance specifications

    One-Piece (smooth surface) The highest quality direct replacement discs on the market, our one-piece discs are exceptionally popular with fleet and police vehicles for unrivaled durabilty, thermal stability, and Lowest Cost Per Mile.

    Two-Piece Direct Drive™ (smooth or dimpled surface) With Performance Friction’s two-piece floating Direct Drive™ Disc, the disc flange floats in the bobbin structure allowing radial and axial expansion of the disc without being constrained by the hub or hat. Eliminates Vibration and Pulsation, Reuseable hat/hub assembly, Reduces drag for increased fuel mileage and reduced pad wear. Lowest Cost Per Mile

    • Manufacuter:Performance Friction
    • Rotor Diameter in MM:319
    • Rotor Style:Dimpled
    • Brake Rotor Type:2 Piece Floating/Direct Drive
    • Sold As:Each
    • Fitment Side:Right/Passenger Side
    • Shipping Cost:Details
    [319.32.0060.87]Performance Friction 2 Piece Floating High Performance Brake rotors 319.32.0060.87
    Our Price: $213.75
    Quantity
    SKU: 319.32.0060.87
    Replacement rotor and hardware for assembly no. 319.044.87

    All Performance Friction Discs adhere to the following specifications:

  • High Carbon Alloy with copper and molybdenum for high temperature strength and durability.
  • Vanes turned OD and ID for balance to reduce thermal warping and vibration.
  • Thickness variation less than .0003 inches and Run out less than .001 inches reduces Pulsation and Vibration.
  • 47 or more vanes for superior thermal capacity.
  • Aircraft quality heat treatment for micro structure alignment and durability.
  • Surface finish less than .7 microns.
  • 100% measured and inspected to meet strict tolerance specifications

    One-Piece (smooth surface) The highest quality direct replacement discs on the market, our one-piece discs are exceptionally popular with fleet and police vehicles for unrivaled durabilty, thermal stability, and Lowest Cost Per Mile.

    Two-Piece Direct Drive™ (smooth or dimpled surface) With Performance Friction’s two-piece floating Direct Drive™ Disc, the disc flange floats in the bobbin structure allowing radial and axial expansion of the disc without being constrained by the hub or hat. Eliminates Vibration and Pulsation, Reuseable hat/hub assembly, Reduces drag for increased fuel mileage and reduced pad wear. Lowest Cost Per Mile

    • Manufacuter:Performance Friction
    • Rotor Diameter in MM:319
    • Rotor Style:Dimpled
    • Brake Rotor Type:2 Piece Floating/Direct Drive
    • Sold As:Each
    • Fitment Side:Left/Driver Side
    • Shipping Cost:Details
    [319.32.0060.88]Performance Friction 2 Piece Floating High Performance Brake rotors 319.32.0060.88
    Our Price: $213.75
    Quantity
    SKU: 319.32.0060.88
    Replacement rotor and hardware for assembly no. 319.044.88

    All Performance Friction Discs adhere to the following specifications:

  • High Carbon Alloy with copper and molybdenum for high temperature strength and durability.
  • Vanes turned OD and ID for balance to reduce thermal warping and vibration.
  • Thickness variation less than .0003 inches and Run out less than .001 inches reduces Pulsation and Vibration.
  • 47 or more vanes for superior thermal capacity.
  • Aircraft quality heat treatment for micro structure alignment and durability.
  • Surface finish less than .7 microns.
  • 100% measured and inspected to meet strict tolerance specifications

    One-Piece (smooth surface) The highest quality direct replacement discs on the market, our one-piece discs are exceptionally popular with fleet and police vehicles for unrivaled durabilty, thermal stability, and Lowest Cost Per Mile.

    Two-Piece Direct Drive™ (smooth or dimpled surface) With Performance Friction’s two-piece floating Direct Drive™ Disc, the disc flange floats in the bobbin structure allowing radial and axial expansion of the disc without being constrained by the hub or hat. Eliminates Vibration and Pulsation, Reuseable hat/hub assembly, Reduces drag for increased fuel mileage and reduced pad wear. Lowest Cost Per Mile

    • Manufacuter:Performance Friction
    • Rotor Diameter in MM:319
    • Rotor Style:Dimpled
    • Brake Rotor Type:2 Piece Floating/Direct Drive
    • Sold As:Each
    • Fitment Side:Right/Passenger Side
    • Shipping Cost:Details
    [D30-345]Sp Performance Diamond Slotted Performance Brake Rotors-Zinc Coating D30-345
    Our Price: $251.50
    Quantity
    SKU: D30-345

    The SP Diamond Slot is a unique design in slotted technology. This design was created to maximize the out-gassing while maintaining the structural integrity of the rotor. The series of slots and diamond slots wipes the surface of the pad, reducing gases which build up and cause brakes to fade at higher temperatures. The slots and diamonds are machined to the minimum rotor thickness to insure rotor strength and integrity. The appearance of this design is highly desirable to the performance enthusiast wanting a new look to their vehicle.

    Advantages of Diamond Slot Rotors
  • Increased brake pad bite
  • Faster release of brake pad gases
  • Improved wet weather braking
  • Reduced fade
  • Increased Safety and Reliability
  • Runs cool..Looks cool

    We begin by selecting only the finest quality materials and components and then utilizing unique innovations and manufacturing techniques, we are able to achieve the highest consistent quality. Rotors: SP has become a leader in its technology of cross-drilling, slotting, diamond slotting, and cross-drilling & slotting. Unique features such as the radius chaffered holes, and exclusive Diamond Slots, makes our rotors perform and look like no others.

    Rotor production starts by selecting the finest OE quality blanks available in the market. Each rotor is then studied and analyzed to insure that surface quality, vent design, and finished surfaces meet or exceed our strict standards. The specific pattern is then utilized with a computer design program specifically for the application. Next, the rotors are precisely machined using CNC machines to ensure that the highest consistent quality can be achieved.

    Not only do we provide our customers with 4 different patterns to choose from, we can also boast of having the largest coverage in the industry with applications for Domestic and Foreign Cars, Trucks, and SUVs.

    		•
    [F30-345]Sp Performance Cross Drilled and Slotted Brake Rotors-Zinc Coating F30-345
    Our Price: $246.20
    Quantity
    SKU: F30-345

    SP Drilled and Slotted Rotors are a unique design offering the best combination of cooling and out-gassing. In fact, our design is so unique we would like to go over some of the details. The first thing we will point out on the drilled rotor is the chamfer. Unlike our competition there is no edge on our chamfer. This is accomplished by the use of an outer radius curve rather than a countersink. With the radius curve, or Sinusoid Curve, it virtually eliminates an edge on the surface of the hole. With no edge, there is less stress build up, thus reducing the chance of surface checking. This smooth surface also makes the rotor more pad friendly by reducing the wear of the pad caused by the friction scraping against a sharp edge.

    Advantages of the SP Cross-drilled and Slotted Rotors
  • Maximum air circulation for increased cooling
  • Increased brake pad bite
  • Faster release of brake pad gases
  • Improved wet weather braking
  • Reduced fade
  • Increased Safety and Reliability
  • Runs cool..Looks cool

    We begin by selecting only the finest quality materials and components and then utilizing unique innovations and manufacturing techniques, we are able to achieve the highest consistent quality. Rotors: SP has become a leader in its technology of cross-drilling, slotting, diamond slotting, and cross-drilling & slotting. Unique features such as the radius chaffered holes, and exclusive Diamond Slots, makes our rotors perform and look like no others.

    Rotor production starts by selecting the finest OE quality blanks available in the market. Each rotor is then studied and analyzed to insure that surface quality, vent design, and finished surfaces meet or exceed our strict standards. The specific pattern is then utilized with a computer design program specifically for the application. Next, the rotors are precisely machined using CNC machines to ensure that the highest consistent quality can be achieved.

    Not only do we provide our customers with 4 different patterns to choose from, we can also boast of having the largest coverage in the industry with applications for Domestic and Foreign Cars, Trucks, and SUVs.

    		•
    [T30-345]Sp Performance Slotted Brake Rotors-Zinc Coating T30-345
    Our Price: $230.00
    Quantity
    SKU: T30-345
  • With SP Performance Slotted rotors, you will feel the difference. Its series of slots wipe the surface of the rotor forcing the gases to expel through the slots. The slots also greatly improve wet weather braking by preventing hydroplaning between the pad and rotor. The slots on SP Performance rotors are machined to the minimum thickness. This is done to insure that the rotor strength is not compromised, keeping safety and reliability in mind for virtually all automotive cars and trucks.This is a bolt-on, hassle free way to greatly improve your stopping performanceAdvantage of the SP Cross-drilled and Slotted Rotors
  • Increased brake pad bite
  • Faster release of brake pad gases
  • Improved wet weather braking
  • Reduced fade
  • Increased Safety and Reliability
  • We begin by selecting only the finest quality materials and components and then utilizing unique innovations and manufacturing techniques, we are able to achieve the highest consistent quality. Rotors: SP has become a leader in its technology of cross-drilling, slotting, diamond slotting, and cross-drilling & slotting. Unique features such as the radius chaffered holes, and exclusive Diamond Slots, makes our rotors perform and look like no others.
  • Rotor production starts by selecting the finest OE quality blanks available in the market. Each rotor is then studied and analyzed to insure that surface quality, vent design, and finished surfaces meet or exceed our strict standards. The specific pattern is then utilized with a computer design program specifically for the application. Next, the rotors are precisely machined using CNC machines to ensure that the highest consistent quality can be achieved.
  • Not only do we provide our customers with 4 different patterns to choose from, we can also boast of having the largest coverage in the industry with applications for Domestic and Foreign Cars, Trucks, and SUVs.
    		•