Hawk Performance Blue 9012 HB100E.480 Racing Brake Pads have medium/High torque and temperature compound with excellent brake modulation. #1 selling brake pad material for SCCA..
Blue 9012
Medium to high torque and temperature compound, with excellent
brake modulation.
Blue 9012 Letter Code E
Note: See DTC-60 for latest material development
Remarks!
250-1000°F; 121-538°C
Low to Mid Temp
Low to Intermediate Torque
Excellent Modulation
Multi-purpose compound
Applications
Road and Rally Racing Hawk Performance Frequently Asked Motorsports Pad Questions
Q: What are racing brake pads made from?
A: Racing brake pads are made from a variety of ingredients like metals, resins and fillers. The combination of ingredients and the size and weight
of the ingredients used in the friction formula can create very different performance levels and characteristics.
Q: With all the different brake compounds available today, how do I make the proper choice of what to use on my race car?
A: Choosing the proper brake pad compound that will provide the best performance for your Motorsports application can be made easier by following
the guidelines outlined below:
Determine what compounds and styles of brake pads are available for your calipers and type of racing.
Determine the operating temperature of your car’s brake system. Heat sensitive paint can be applied to the brake pads and rotors to help you
gauge temperature. Tire pyrometers can be used, but due to the cool down time the temperature numbers may not be accurate.
Upon learning your system's temperatures, or if you do not know your temperatures, contact Hawk Performance at 440-528-4000 for
recommendations regarding proper brake material for your application.
Other drivers that share your driving style will sometimes provide valuable information that may allow you to learn what brake pads other
drivers have used and liked or disliked.
Contact your local racing products dealer and inquire as to what brake pads they offer and recommend for your application.
It’s important to understand different types of racecars, racing surfaces and driving styles may require different levels of braking performance,
and many drivers expect the brake system to have a certain feel that suits their individual needs. Because of this, it should not be assumed
that what works for one driver would work for all. In some cases the best way to learn what is best for you is to experiment with a variety of
friction compounds to determine how a particular pad differs from another regarding issues such as pedal feel, consistency, and rotor and brake
pad wear.
Note: Hawk Performance has also listed a summary of compounds with application recommendations on the Motorsports Compound Guide on page
18 and on our website at www.HawkPerformance.com.
Q: What are some noticeable signs that I have made the wrong pad choice for my Motorsports racing application?
A: When a friction compound is used in a substantially higher temperature range than intended, the material can quickly lose its ability to perform
correctly. Generally, an overheated brake pad will continue to provide a hard pedal but require more foot and pedal effort to achieve even marginal
performance. Continued use during this type of circumstance can result in complete brake pad failure.
Q: What happens if I choose a brake pad compound that does not have a high enough temperature range for my application?
A: It’s important to understand the chain of events that take place when a brake pad becomes too hot to work correctly. As the pad begins to lose
performance effectiveness the driver may try to compensate by pushing harder and longer on the pedal. This may cause friction surface temperature
to increase thereby increasing the brake problem. When this occurs, great stress is put on the friction material and the material can begin to
crystallize. In extreme cases delaminating between the friction material and the pad's backing plate can sometimes occur. This type of situation
may be corrected by choosing a friction compound designed to withstand higher temperature. Please refer to the Motorsports index on page 18
for Hawk Performance racing brake pad optimal operating temperatures by type.
Q: Why should I perform a break-in procedure on new brake pads?
A: Correct brake pad break-in (bedding) is important to assure optimal braking performance over the life of the pad. This procedure allows the
rubbing surface of the brake pad to slowly be brought up to racing temperatures. Proper bedding creates a transfer layer film of friction material
to be applied to the rotor surface. This allows the brake pad material to rub against itself rather than the bare rotor. This increases the stopping
performance of the brake pad and can reduce pad and rotor wear.
Q: What is the proper procedure for braking in new brake pads?
A: Brake pad break-in procedure:
Brake Pad Burnishing/Bedding-In Instructions
- After reaching medium speed engage brake pedal to slow car without coming to a complete stop.
Release pedal quickly and do not drag brakes. Repeat four or five times.
- At higher speeds engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes.
Repeat five times.
- At or near race speed engage brake pedal to slow car without coming to a complete stop. Release pedal quickly and do not drag brakes.
Repeat three times. Allow a few seconds between brake engagements while car is in motion
- Do not hold brake pedal. Park car for approximately 20 minutes or until brake rotors are completely cool to the touch.
- If during the above steps the brake pedal becomes soft or brake fade is noticed, park the car immediately for approximately 20 minutes.
Do not hold brake pedal.
IMPORTANT REMINDERS WHEN BURNISHING/BEDDING BRAKE PADS
Do not attempt to use badly worn or damaged rotors with new brake pads.
Do not drag brakes while car is moving during break-in procedure.
Do not engage pedal while car is stopped at any time following the break-in procedure.
Upon completing the procedure, allow the brake system to completely cool before racing.
Applying the pedal a few times before the start of the race will allow the brake pads to heat up before attempting to reach race speeds.
Clean a used rotor surface with fine sand paper or steel wool, rinse with water, dry and install before bedding new pads.
Some forms of racing don't allow time for the proper break-in procedure to be performed. However, it is still very important to attempt to
perform at least the core of the procedure: Build up heat slowly and allow the system to completely cool down before racing if possible.
Q: What can happen to my brake pads if not bedded properly?
A: Proper break-in will assure that small amounts of heat are introduced to the brake pad. Brake pads that are brought up to temperature too fast
and not properly allowed to cool down may quickly become glazed and not perform as originally intended. The pad’s rubbing surface reaches
extreme heat levels during racing use. The surface needs slow temperature increases to help prepare the pad. Large amounts of heat all at one
time can cause the brake pad rubbing surface to become somewhat liquefied and coat the pad surface with a glaze. This will dramatically
reduce stopping performance as certain ingredients in the friction compound break down and cause glazing of the rubbing surface of the brake pad.
Q: How can I tell by looking at the brake pad if my pads have been glazed over?
A: When a brake pad glazes over, the friction surface develops a cloudy or glassy looking coating. It is possible to remove the glazed surface by
using sand paper to grind away the damaged layer and expose a new layer that will require the proper bedding procedure.
Q: What is a pre-bedded brake pad?
A: Some brake pad manufacturers offer a pre-bedded pad and/or a pre-bedding service. Pre-bedding involves placing pads in a caliper and running
them against a mechanically driven rotor in a controlled environment. The rotor and pads are slowly brought up to temperature and allowed to
cool down over several cycles. This process simulates on track situations while allowing the two surfaces to mate correctly in an optimum
environment. While this process can be very expensive, it greatly reduces the break-in time prior to pad purchase. In most cases the rotor and
the pad are, and should be, sold as a matched set.
Q: What is a pre-burnished brake pad?
A: Some brake pads are pre-burnished during the manufacturing process. Pads that are pre-burnished have had high temperature applied to the
rubbing surface to simulate the first few engagements on an actual race car. The process will allow the pad to break-in quickly and to begin
working more effectively in a shorter time. Pre-burnished pads still need to be properly bedded to help assure that the pad and the rotor have
an opportunity to mate correctly.